The author contacted designers Claesson Koivisto Rune Arkitektkontor in August 2007regarding his Master thesis at KTH. The company had discussed the possibility of creating achair made from molded pulp. The author was taken on as a manager for the project. Theobjective was to produce design documentation for a paper pulp chair which was to belaunched at the in 2008 Milan Furniture Fair. The purpose of the thesis was to develop aproduct with scientific methods as well as to investigate how to make collaboration betweendesigners and engineers easier through communication.The project went through four basic stages: Information, Analysis, Synthesis and Evaluation.Information on paper pulp, molded pulp, chair design, sitting postures and the existingmarket of molded pulp furniture.

Södra Cell Mörrum is one of the five paper pulp plants that are included in Södra Cell, and the paper pulp that is produced here is not only sold to Swedish paper mills. Most of the paper pulp is exported to different countries in Europe. In the manufacturing process the plant needs different kind of process water and there are guideline values for how much copper, iron and sodium this water is allowed to contain. Analyzes of this water is in the current situation done with an atomic absorption spectrometric instrument (AAS-instrument) with a flame. Measurements done with flame-AAS of samples that have concentrations near the guideline values for copper, iron and sodium, are not reliable. The reason for not being reliable is that the quantitation limits of these metals are higher than the limit values.

This thesis work was made for Södra Cell Mörrums bruk in Blekinge. The purpose of the work was to develop a computer model in the simulation program Extend for the removal and balance of organic oxygen consuming substances, measured as COD (Chemical Oxygen Demand), in the new biological treatment plant in the mill. The plant produces two different pulp products, TCF- (Totally Chlorine Free) pulp and ECF- (Elementary Chlorine Free) pulp, for sale. The different bleaching procedures affect the characteristic of the wastewater and thus the effectiveness of the biological treatment plant.In the model that was developed the COD in the wastewater was divided into five different COD-fractions: soluble easily degradable (SS), soluble hardly degradable (SR), soluble inert (SI), particulate inert (XI) and particulate biomass (XB). To create the model FlowMac? was used as a base.

The Swedish pulp and paper industry meets higher demand for energy efficiencyi mprovements with increasing energy prices and changes in the Swedish renewable energy certificate system. One action of energy efficiency improvement is by using secondary heat, that otherwise would have been treated as waste heat, for use in a system with lower temperature demands. The aim of this Master´s thesis is to identify possible secondary heat sources in a typical Swedish pulp and paper mill and to investigate what economic benefits the secondary heat will provide when being used for pre heating of wood chips to a kraft digester.The Master´s thesis focuses on three secondary heat sources; dry warm air, warm water and moisture saturated warm air located inside the pulp or paper mill. Two types of kraft digesters are simulated within this study, a typical Scandinavian digester and a modern twin vessel steam phase digester.Due to quality aspects and low temperature level drying is the drying technology with dry warm air rejected. Using warm water in direct contact with wood chips increases the quantity of water to the evaporation plant and thus reduced pulp or paper production and is therefore also rejected.

At Rottneros pulp mill mechanical pulp is bleached with hydrogen peroxide. The changes of bleaching chemicals that are used for different grades are taken from bleaching tables; however these tables are old and need to be updated. The purpose of this thesis was to be the basis of new documentation.In this thesis three pulps where studied with the aim to find the optimal bleaching chemical changes (total NaOH/VP-quote) for each pulp. The pulps were taken from the filter before the bleaching tower and the pulps were bleached in the lab. The most important pulp property in this study was the brightness and how that was influenced by the chemical dosages.

Until the beginning of the 1900:th century the paper making process was handicraft. The paper machines that have been developed since then are as impressing in size as fascinating when it comes to the technique. The process has always been improved to give a better paper for lower costs, with as short manufacture time as possible. Stratified forming has been a reality since 1830. From the beginning it was applied to board and paperboard.

This paper deals with village history around millstone quarry Eastern Utsjö in Malung, Sweden, in the hope of finding deposits that could date the quarry, in that the quarry in the current situation is dated only by the millstone fragments outside the resort. My purpose was to conduct a discussion on the quarry alone can be dated by deposits outside the resort. I have used FMIS RAÄ:s fornsök and a lot of literature to identify village history. The results showed that it is not possible to date the millstone quarry from village history, but through deposits outside the resort of Malung, which have been found around Mälardalen, Sweden through archaeological excavations, and derived from the millstone quarry Eastern Utsjö, can put an age on the quarry..

Today's society is facing major challenges. In order to reduce the climate impact fossil fuels should be replaced with fuels that do not contribute to the greenhouse effect. The growing population generates organic waste originating from industry and households so called organic fraction of municipal solid waste (OFMSW). Through anaerobic digestion, waste can be utilized to produce energy-rich methane gas. In this way, waste can be a resource instead of a burden on society.

Benchmarking is an established method of working which is often used in order to develop the quality of the organization. However, almost 70% of the organizations with benchmarking fail due to the lack of planning and structuring of the benchmarking exercise. Maintenance sections in the paper and pulp industry are one of those who have decided to conduct benchmarking. Therefore, the purpose of this study is to gain knowledge of how the maintenance sections in the paper and pulp industry deliberately structure and plan to use benchmarking as a driving force for quality development in the maintenance sections.The study is a hermeneutic case study. Telephone interviews and document analysis have been used as data acquisition methods.The results show that there is a lack of both planning and structuring in the benchmarking process, and lack of management commitment for quality improvements within industrial maintenance.

According to Food and Agriculture Organization newsprint is defined as: Uncoated paper, unsized (or only slightly sized), containing at least 60 percent of mechanical wood pulp. The consumption of newsprint in Sweden was just over 798 000 tonnes in 2009, which represents approximately 90 kg per person. Although there are studies that predict a drastic reduction in newsprint consumption in the Western world, there seems to be a clear difference between forecasts for the future given by statistical analysis of newsprint consumption and forecasts given by experts in the industry. The former predict a continuing increase while the experts see a coming decrease in consumption.In this report, both demand and business strategies of newsprint in Sweden are studied. The study also presents a forecast of the future which is based on historical data and qualitative interviews.

Benchmarking is an established method of working which is often used in order to develop the quality of the organization. However, almost 70% of the organizations with benchmarking fail due to the lack of planning and structuring of the benchmarking exercise. Maintenance sections in the paper and pulp industry are one of those who have decided to conduct benchmarking. Therefore, the purpose of this study is to gain knowledge of how the maintenance sections in the paper and pulp industry deliberately structure and plan to use benchmarking as a driving force for quality development in the maintenance sections.The study is a hermeneutic case study. Telephone interviews and document analysis have been used as data acquisition methods.The results show that there is a lack of both planning and structuring in the benchmarking process, and lack of management commitment for quality improvements within industrial maintenance.

We aim to investigate the risk exposure against commodity prices in the forestry and paper industry. The intension is also to study the affect that the changes in commodity prices has on a company?s market value..

This master thesis consists of an investigation of the profitability per hectare in privatly owned forest land. The investigation is based on data collected from Skogsstyrelesen, Riksskogstaxeringen and Skogsforsk. During the last twenty years the prices on pulp wood and saw log have substantial decreased, but during the same time the the volumes from final felling have increased and the cost for felling has decreased, this investigation shows how the netprofit per hectARE after final felling has changed between year 1980-2005 This investigation shows that that the netprofit has stayed on a stable level during the years 1985-2005 even though prices pulp wood and saw log decreased. Much indicates that the demand of swedish pulp wood and saw log will continue to be strong or even stronger wich will give increased prices and an higher netprofit after final felling in the future.

This bachelor thesis is about civilian marching bands in the province Värmland industrial communities, with a focus on Degerfors, Edsvalla, Gruvön, Nors, Slottsbron, and Vålberg bands. Degerfors, Gruvön, and Slottsbron bands are three corps that still operates concerts and performances. The other three unions are defunct.In Värmland, there were many mills that were operating well into the 1900s, roughly speaking there were about 25 mills in various industrial areas. These mills had operations in glass, iron, and paper, each user had a band at least a brass sextet and today there are only eight bands left in Värmland. Bofors in Karlskoga, Charlottenberg, Degerfors, Dejefors, Gruvöns in Grums, Hagfors, Skoghall, and Slottsbron bands.What is the reason that so many bands have disappeared? To answer the question I have investigated the importance of four factors have had for the unions: finance, recruitment collaboration with the music and arts, as well as cooperation with educational associations.The results show a marked reduction in civil bands, from about 25 corps to eight corps today.

Metso Paper offers a front-running range of solutions and services for the pulp and paper industry. At the baling unit, design solutions are developed for manufacturing and handling of pulp bales. The machines are continuously developed to satisfy customer needs. One big step in the development of the baling line was to remove hydraulics from the machines and replace it with electrical motors and pneumatics. This was not done on the folding machine which is still driven by mainly hydraulics.